Aries-automotive W15500-2 User Manual download pdf

INSTALLATION INSTRUCTIONS

DOUBLE TUBE FRONT BUMPER WITHOUT / WITH WINCH MOUNT

PART# 15500/15500-2/W15500/W15500-2

07 JEEP WRANGLER 4 DOOR

PARTS LIST

1 Front Bumper

2 Brackets

8 12MM X 35MM bolts

8 12MM nylon lock nuts

16 12MM washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Unplug the bumper lights electrical connections (Fig 1)

3. Remove front factory bumper by removing the eight mounting bolts with a 17MM

socket wrench (Fig 1)

4. Install the new bumper brackets as shown in photos. Note that the bracket faces

rearward and the forward facing holes (those the mounts bolt onto the frame) are

horizontal, and those the bumper mounts to are vertical. (Fig 2)

5. Install the 12MM bolts and locking nuts to the mounts but leave finger tight to allow for

adjustment

6. Install the 12MM bolts and locking nuts to the bumper and the mount.

7. Adjust the bumper and tighten all the bolts. (Fig 3)

Fig 2 Note the orientation of the bolt holes

Fig 1

Fig 3

Bumper light plug

Four mounting bolts

per side

INSTALLATION INSTRUCTIONS DOUBLE TUBE FRONT BUMPER WITHOUT / WITH WINCH MOUNT PART# 15500/15500-2/W15500/W15500-2 07 JEEP WRANGLER 4 DOOR PARTS LI

Related models: W15500 | 15500-2 | 15500 |

No comments