Aries-automotive P4068 User Manual

Browse online or download User Manual for For the car Aries-automotive P4068. Aries Automotive P4068 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
PARTS LIST:
1
Grille Guard
10
12mm x 24mm OD x 2.5mm STD Flat Washers
1
Driver/Left Top Bracket
12
12mm x 32mm OD x 3mm Large Flat Washers
1
Passenger/Right Top Bracket
12
12mm Nylon Lock Nuts
2
Frame Mounting Brackets
2
10-1.50mm x 25mm Button Head Bolts
2
Lower Frame Support Brackets
4
10mm x 20mm x 2mm Flat Washers
2
12-1.75mm x 40mm Bolt Plates (#11)
2
10mm Nylon Lock Nuts
2
12mm Plastic Retainers
2
600mm x 50mm x 1.0mm Adhesive Backed Foam Tape
2
12-1.75mm x 140mm Hex Bolts
1
6mm Allen Wrench
8
12-1.75mm x 30mm Hex Bolts
1
Support Flange
2
8mm Nut Clips
2
8mm Flat Washers
2
8mm Hex Bolts
2
8mm Lock Washers
PROCEDURE:
1. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY. DO NOT ATTEMPT INSTALLATION ALONE; PERSONAL INJURY OR DAMAGE TO
THE VEHICLE MAY RESULT. CUTTING IS REQUIRED.
2. Start by Selecting your LED light (Sold Separately) mounting hardware & brackets, you will need to first
attached the hardware to the support flange, (Example of LED light attached Fig 1) NOTE: if you have
your own LED light, LED Manufactures will have similar but different mounting styles or brackets,
once you determine you mounting options attach it to the support flange as seen in (Fig1)
Frame
Mounting
Bracket
Frame
Mounting
Bracket
Driver/Left Top
Bracket
Passenger/Right Top
Support Bracket
(2) 12mm x 40mm Bolt
Plates (pictured w/hardware)
Adhesive Backed
Foam Tape
INSTALLATION INSTRUCTIONS
2007-13 SILVERADO 1500
PART # P4068
(2) 8mm Nut Clips
Support Flange
Page 1 of 6
Page view 0
1 2 3 4 5 6

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

PARTS LIST: 1 Grille Guard 10 12mm x 24mm OD x 2.5mm STD Flat Washers 1 Driver/Left Top Bracket 12 12mm x 32mm OD x 3mm Large Flat Washers

Page 2 - 11/15/13

3. With the LED light attached to the support flange select the (2) 8mm nut clips place each nut clip into the slotted holes on either side of the s

Page 3 - Page 3 of 6

8. Remove the long factory top bumper bracket bolt behind the bumper on the top of the frame. Select the driver side Top Bracket. Apply a layer of Ad

Page 4 - Page 4 of 6

(Fig 4) Opening for tow hook pictured (Fig 5) No opening in bumper cover (Fig 6) Passen

Page 5 - Page 5 of 6

Passenger Side Mounting Bracket Installation Pictured Driver Side Mounting Bracket Installation Pictured

Page 6 - Page 6 of 6

Driver Side Mounting Bracket Installation Pictured Fig 12 (Fig 14) Driver side Top Bracket installation pictured without foam for instr

Comments to this Manuals

No comments