Aries-automotive B35-5007 User Manual download pdf

Page 1 of 3 2/11/11 (DP)

PARTS LIST:

Bull Bar

1 Driver/Left Side Frame Mounting Bracket

1 Passenger/Right Side Frame Mounting Bracket

8 10-1.5mm x 35mm Hex Bolts

12 10mm x 30mm OD x 2.5mm Flat Washers

8 10mm Lock Washers

4 10mm Hex Nuts

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.

2. Determine if the vehicle is equipped with, (Figure 1) or without factory tow hooks, (Figure 2). Remove

the plastic splash guard, (Figures 3 & 4). Pay close attention to the type and location of all factory

hardware for easier reinstallation. If vehicle is equipped with tow hooks, remove both tow hooks and

skip ahead to Step 3. NOTE: Tow hooks cannot be reinstalled with the Bull Bar.

a. On vehicles without factory tow hooks: Release the clips at the ends of the plastic bumper

cover that attach the lower cover to the upper cover. NOTE: It is not necessary to remove the

lower cover, only release the clips at the ends of the cover. Next, remove the (3) clips fastening

the air deflector to the bottom of the crossmember, (Figures 3 & 4). Pull the bumper cover

forward for access and pull the air deflector out from behind the bumper cover, (Figure 5).

Release the clips securing the (2) block off covers to the ends of the air deflector, (Figure 6).

Remove the (2) block offs. Reinstall the air deflector using the factory hardware. Reinstall the

bumper cover.

3. Select the driver side Frame Mounting Bracket. Line up the (2) slots in the bracket with the (2) threaded

holes in the bottom of the frame channel, (Figure 7). Bolt the Bracket to the frame channel with (2)

10mm x 35mm Hex Bolts, (2) 10mm Flat Washers and (2) 10mm Lock Washers, (Figure 8). Do not

tighten hardware at this time. Repeat this step for passenger side Frame Bracket installation.

IMPORTANT: This Bull Bar is not compatible with optional Adaptive Cruise Control-

Forward Collision Warning Systems featuring grille mounted laser control sensor.

Driver Side

Mounting Bracket

Passenger Side

Mounting Bracket

Complete Installation

INSTALLATION INSTRUCTIONS

2.5” BULL BAR PART # 35-5007/B35-5007

2011 DODGE DURANGO

1 2 3

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Page 1 of 3 2/11/11 (DP) PARTS LIST: 1 Bull Bar 1 Driver/Left Side Frame Mounting Bracket 1 Passe

Page 2

Page 2 of 3 2/11/11 (DP) 4. With assistance, hold the Bull Bar up to the outside of the Mounting Brackets.

Page 3

Page 3 of 3 2/11/11 (DP) Driver Side Installation Pictured Fig 5 (Fig

Comments to this Manuals

No comments

Aries-automotive B35-5007 User Manual

Browse online or download User Manual for For the car Aries-automotive B35-5007. Aries Automotive B35-5007 User Manual [ru]

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Aries-automotive B35-5007