Aries-automotive 2058-2 User Manual download pdf

Page 1 of 2 1/31/07 (AM)

PARTS LIST:

1 Grille Guard 2

10-1.50mm x 25mm Button Head Bolts

1 Passenger Side Mounting Bracket (D) 4 10-1.50mm x 25mm Hex Bolts

1 Driver Side Mounting Bracket (A) 6

10mm Nylock Nuts

1 Passenger Side Top Bracket (C) 10 10mm Flat Washers

1 Driver Side Top Bracket (B) 6

12-1.75mm x 30mm Hex Bolts

4 8-125mm x 115mm Hex Bolts 6 12mm Nylock Nuts

4 8mm Nylock Nuts 12 12mm Flat Washers

8 8mm Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Locate the two existing holes on the front of the frame rail.

3. Position Passenger Side Mounting Bracket onto frame rail. NOTE: Mounting Bracket mounts

on the outer side of frame rails.

4. Line up holes on the Mounting Bracket with holes on the frame rail. Secure Mounting Bracket

with the included (2) 8-1.25mm x 115mm Hex Bolts, (2) 8mm Nylock Nuts, and (4) 8mm Flat

Washers (Figure 1 & 2). Do not tighten at this time.

5. Repeat steps 1-3 for driver side.

6. Once Both Mounting Brackets are installed, proceed to install the Top Brackets. Insert flat side

of Top Brackets through the upper section on the factory grille shell. Attach Top Brackets to

Mounting Brackets by using the included (4) 10-1.50mm x 25mm Hex bolts, (4) 10mm Nylock

Nuts, and (8) 10mm Flat Washers (Figure 3). Do not tighten at this time.

7. With help position Grille Guard on the outer side of Mounting Brackets. Line up holes on the

Mounting Bracket with holes on the Grille Guard.

8. Attach Grille Guard to Mounting Brackets using the included (6) 12-1.75mm x 30mm Hex

Bolts, (6) 12mm Nylock Nuts, and (12) 12mm Flat Washers (Figure 3). Do not tighten at this

time.

9. Once the bottom brackets are loosely installed, proceed to attach Grille Guard to Top Brackets

by using the included (2) 10-1.50mm Button Head Bolts, (2) 10mm Nylock Nuts, and (2) 10mm

Flat Washers (Figure 4). Do not tighten at this time.

10. Level and adjust grille guard; then proceed to tighten all hardware at this time.

11. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

INSTALLATION INSTRUCTIONS

GRILLE GUARD PART NUMBER

2058/2058-2

03-07 TOYOTA 4RUNNER

(B)

(D)

(C)

(A)

1 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Page 1 of 2 1/31/07 (AM) PARTS LIST: 1 Grille Guard 2 10-1.50mm x 25mm Butto

Page 2 - Figure 4 Figure 5

Page 2 of 2 1/31/07 (AM) Bottom view of Passenger Side Mounting Bracket Top view of Passenge

Related models: 2058

Comments to this Manuals

No comments

Aries-automotive 2058-2 User Manual

Browse online or download User Manual for For the car Aries-automotive 2058-2. Aries Automotive 2058-2 User Manual [ru]

Summary of Contents

Related models: 2058

Comments to this Manuals

Related products and manuals for For the car Aries-automotive 2058-2