Aries-automotive AL45-2004 User Manual download pdf

ART # AL45-2004

PARTS LIST:

1 Bull Bar 4 12mm lock Nuts

4 12-1.75mm x 30mm Hex Head Bolts 8 12mm Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Locate and remove the factory tow hooks underneath the vehicle (Figure 2). Save hardware

for later use.

3. Locate Passenger Side Mounting Bracket and loosely attach it to vehicle by using the factory

bolts removed in step two (Figure 3). Passenger Side shown in Figure 3. Repeat this step for

Driver Side Mounting Bracket.

4. Once the Mounting Brackets are loosely installed, with help position the Bull Bar on the outer

side of the Mounting Brackets and attach it with the included (4) 12-1.75 mm x 30mm Hex

Head Bolts, (4) 12mm Nylock Nuts, and (8) 12mm Flat Washers (Figure 3).

5. Level and adjust the Bull Bar and tighten all hardware at this time.

Figure 1

Figure 2 Figure 3

INSTALLATION INSTRUCTIONS

4 INCH BULL BAR P

12mm Hardware

Factory Bolts

Driver Side

Bracket

Passenger

Side Bracket

Remove

these bolts

2007-13 TOYOTA TUNDRA / 2008-12 SEQUOIA (NO SKID PLATE)

Page 1

ART # AL45-2004 PARTS LIST: 1 Bull Bar 4 12mm lock Nuts 4 12-1.75mm x 30mm Hex Head Bolts 8 12mm Flat Washers PROCEDURE: 1. RE

Related models: 45-2004

No comments