Aries-automotive 6547 User Manual download pdf

2007-10 HONDA CRV

PARTS LIST:

1 Sport Bar 4 12-1.75mm x 35mm Hex Head Bolt

1 Driver Mounting Bracket 6 12mm Nylock Nuts

1 Passenger Mounting Bracket 12 12mm Flat Washer

2 12-1.75mm x 70mm Hex Head Bolt

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Locate and remove the passenger factory support bolt located on the inner side of plastic

shroud underneath the vehicle (Figure 2). Save bolt for later use. NOTE: You do not need to

remove plastic shroud underneath vehicle.

3. Position Passenger Side Mounting Bracket as shown in Figure 2 and re-attach factory bolt

removed in step 2. Do not tighten at this time.

4. Use the included (1) 12-1.75mm x 70mm Hex Head Bolt, (1) 12mm lock Nut, and (2) 12mm

Flat Washers to attach the second mounting hole on the bracket to the factory hole (Figure 2).

Do not tighten at this time.

5. Repeat steps 2-4 for driver side.

6. Mount Sport Bar on the inner side of Mounting Brackets (Figure 3). Use the included (4) 12-

1.75mm x 35mm Hex Head Bolts, (4) 12mm lock Nuts, and (8) 12mm Flat Washers to attach

Sport Bar to both mounting brackets.

7. Once the Sport Bar is fully mounted on vehicle, level and adjust it and tighten all hardware at

this time.

Figure 1 Figure 2 Figure 3

INSTALLATION INSTRUCTIONS

SPORT BAR PART#6547

Included Components

Factory

Bolt

12mm x

70mm

Bolt

12mm x 35mm BoltsPassenger Side Shown

2007-10 HONDA CRV PARTS LIST: 1 Sport Bar 4 12-1.75mm x 35mm Hex Head Bolt 1 Driver Mounting Bracket 6 12mm Nylock Nuts 1 Passenger

No comments

Aries-automotive 6547 User Manual