Aries-automotive 9502 User Manual download pdf

2008- 1 0 NISSAN ROGUE

PARTS LIST:

1 City Bar 8 12mm ID x 29mm OD x 3mm Flat Washers

1 Driver/Left Mounting Bracket 2 8-1.25mm x 30mm Hex Head Bolts

1 Passenger/Right Mounting Bracket 2 8mm Lock Washers

4 12-1.75mm x 35mm Hex Head Bolts 2 8mm ID x 22mm OD x 1.5mm Flat Washers

4 12mm Lock Washers

4 12mm Hex Nuts

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION.

2. From underside of vehicle, remove the front plastic rocker guard and place it on a clean working area. Use a

sharp knife to cut out the marked area on both sides of the plastic shroud (5 ½” x ½” on the passenger side, 5 ½”

x 1 ¼” on the driver side). Start cutting 1 ¼” from the front of the plastic shroud (Figure 1 & 2).

3. Once you cut both areas on the plastic shroud, re-install it back to the vehicle using the factory fasteners.

4. Remove the driver side body mount bolt and the factory bolt in the radiator support located right above the body

mount (Figure 3).

5. Position driver side Mounting Bracket and loosely attach it to vehicle using the factory body mount bolt and by

replacing the radiator support bolt with the included (1) 8mm x 30mm Hex Head Bolt, (1) 8mm Lock Washer, and

(1) 8mm Flat Washer (Figure 4 & 5).

6. Repeat steps 4 & 5 for passenger side Mounting Bracket.

7. With help position Sport Bar on the outer side of Mounting Brackets and attach it using the included (4) 12mmx

35mm Hex Head Bolts, (4) 12mm Lock Washers, (4) 12mm Hex Nuts, and (8) 12mm Flat Washers (Figure 6).

8. Adjust Sport Bar Properly and then tighten all hardware at this time.

9. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer

over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.

For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be

used also to clean the Sidebar.

For gloss black finishes: Mild soap may be used to clean the product.

INSTALLATION INSTRUCTIONS

SPORT BAR PART # 9502

Driver Side

Frame Bracket

Passenger Side

Frame Bracket

1 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

2008- 1 0 NISSAN ROGUE PARTS LIST: 1 City Bar 8 12mm ID x 29mm OD x 3mm Flat Washers 1 Driver/Left Mounting Bracket 2 8-1.25mm x 30m

Page 2 - Fig 1 Fig 2

Driver Side Frame Bracket Inner ViewDriver Side Frame Bracket Outer View Leave 1 ¼” space here Leave 1

Comments to this Manuals

No comments

Aries-automotive 9502 User Manual

Browse online or download User Manual for For the car Aries-automotive 9502. Aries Automotive 9502 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Aries-automotive 9502