Aries-automotive 205006-2 User Manual download pdf

INSTALLATION INSTRUCTIONS

SIDE BAR PART #205006/ 205006-2

2000-2004 DODGE DAKOTA QUAD CAB 2/4WD

PARTS LIST

(2) SIDE TUBES WITH STEPS (2) ½” – 13 x 2 HEX HEAD BOLT

(2) FRONT MOUNT BRACKETS (2) ½” – 13 x 7½” HEX HEAD BOLT

(2) FRONT MOUNT BRACES (8) ½” FLAT WASHER

(2) REAR MOUNT BRACKETS (4) ½” LOCK WASHER

(2) ½” – 13 x 1½” HEX HEAD BOLT (2) ½” HEX NUT

PROCEDURE

1. Begin installation by working on driver side of the vehicle (refer to Figures 1.1- 1.3)

2. Install Mount Brackets to underside of vehicle body mounts using factory bolts.

3. Attach Mount Brace to bottom of vehicle frame rail using (1) ½” – 13 x 7½” hex head bolt, (1) ½” lock

washer, (2) ½” flat washers, and (1) ½” hex nut. The slot on the short end of the Brace Bracket should

align with the Front Mount Bracket slot.

Note: The frame rail hole is located just to the right of the front body mount.

4. Fasten front side of tube to Mount Bracket using (1) ½” – 13 x 2 hex head bolt, (1) ½” lock washer, and

(1) ½” flat washer. Fasten rear side with (1) ½” – 13 x 1½” hex head bolt, and remaining washers.

Note: Step Pad closer to the end of the tube goes to the rear (see Figure 1.1).

5. Torque body mount bolts and the ½” – 13 x 7 ½” bolt to 55 FT-LBS and the remaining ½” fasteners to

65 FT-LBS.

6. Repeat process for passenger side of vehicle to complete installation

1 2

Page 1

INSTALLATION INSTRUCTIONS SIDE BAR PART #205006/ 205006-2 2000-2004 DODGE DAKOTA QUAD CAB 2/4WD PARTS LIST (2) SIDE TUBES WITH STEPS (2) ½

Figure 1.1 - Front Driver-Side View Figure 1.2 - Front Bracket Figure 1.3 - Rear Bracket Factory bolt Factory

Related models: 205006

No comments