PARTS LIST: Qty Description Qty Description 1 Bumper Center section 8 12mm Nuts 1 Bumper Corner Passenger/right side 12 10mm x 35mm Hex bolt
PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. 2. Start by rem
10. Next select the air pump support bracket and air pump support bracket plate, place the support bracket in from under & behind the bumper and
Fig 4A Fig 5 Remove 2 factory nuts holding front bumper driver side shown Unplug wire harness from lights and unclip harness from bumper
Page 5 of 5 Fig 9 Fig 8 Secure bumper per side with (3)12mm hex bolts (6)12mm flat washers (3)12mm loc
Comments to this Manuals