Aries-automotive S224031 User Manual download pdf

Plates (Use for installation on

2010-12 Vehicles Only)

from holes to allow bolt plates to fit into holes & work correctly.

NOTE: The fatory may spray excess foam on the floor panel you may need to scrap foam away

07- CHEVY TRAVERSE/GMC ACADIA/07-10 SATURN OUTLOOK/07-09 BUICK ENCLAVE

(EXCL. 2010-11 BUICK ENCLAVE)

Page 1 of 5

PARTS LIST:

1 Driver/Left Sidebar 6 12mm Lock Washers

1 Passenger/Right Sidebar 6 12mm ID x 32mm OD x 3mm Flat Washers

1 Driver/Left Front Mounting Bracket 6 12mm Hex Nuts

1 Passenger/Right Front Mounting Bracket 4 10mm Lock Washers

1 Driver/Left Rear Mounting Bracket 4 10mm x 27mm OD x 3mm Flat Washers

1 Passenger/Right Rear Mounting Bracket 4 10mm Hex Nuts

2 “Z” Brackets W/Welded 8mm Hex Nuts 12 8-1.25mm x 25mm Hex Bolts

6 12-1.75mm x 45mm Bolt Plates 12 8mm Lock Washers

4 10-1.5mm x 35mm Button Head Bolt Plates 10 8mm ID x 24mm OD x 2mm Flat Washers

6 12mm Square Washers

PROCEDURE:

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY BEFORE STARTING INSTALLATION.

Start installation on the

passenger side

and locate

the factory holes in the bottom and side of the floor

panel

towards the front of the vehicle.

On 2007-09 Vehicles: There is an

oval hole and

a round hole on the bottom

of the floor panel

and a round hole on the side of the floor panel.

Insert (1) 12mm x 45mm Bolt Plate into the oval

hole and turn the Bolt Plate 90-degees so that the plate is across opening, (Figures

& 3B).

On 2010-11 Vehicles: There are two round holes on the bottom of the floor panel, (one

centered, one offset toward the pinch weld), and one round hole on the side of the floor panel.

Insert (1) 10mm x 35mm Button Head Bolt Plate into the round hole in the center of the floor

panel

(Figures

& 4B).

Make sure that the plate is

supported across the hole in the floor panel.

Next, select (1) 8mm "Z" Bracket, (Figure 1B). Insert the end with the hex nut welded onto the outside

of the Bracket into the round hole in the bottom of the floor panel. Maneuver the "Z" Bracket through the

inside of the floor panel and line it up to the hole in the side of the floor panel, (Figures

1A,

& 6).

Driver/Left Side

Front Mounting

Bracket

Driver/Left

Side Rear

Mounting

Bracket

Passenger/Right Side

Front Mounting

Bracket

Passenger/Right

Side Rear

Mounting

Bracket

(6) 12mm x 35mm

Bolt Plates

(6) 12mm Square Washers

(4) 10mm Button Head Bolt

Passenger/Right Sidebar

Driver/Left Sidebar

Front

(2) "Z" Brackets

W/8mm Hex Nuts

1 2 3 4 5

Summary of Contents

Page 1 - Page 1 of 5

Plates (Use for installation on 2010-12 Vehicles Only)from holes to allow bolt plates to fit into holes & work correctly.NOTE: The fatory may spra

Page 2

121212 Vehicles 07- CHEVY TRAVERSE/GMC ACADIA/07-10 SATURN OUTLOOK/07-09 BUICK ENCLAVE (EXCL. 2010-11 BUICK ENCLAVE) Page 2 of 5 4. Position the p

Page 3 - Page 3 of 5

12 07- CHEVY TRAVERSE/GMC ACADIA/07-10 SATURN OUTLOOK/07-09 BUICK ENCLAVE (EXCL. 2010-11 BUICK ENCLAVE) Page 3 of 5 Passenger Side Installation Pic

Page 4

12 07- CHEVY TRAVERSE/GMC ACADIA/07-10 SATURN OUTLOOK/07-09 BUICK ENCLAVE (EXCL. 2010-11 BUICK ENCLAVE) Page 4 of 5 Passenger Side Installation Pic

Page 5 - Page 5 of 5

12 07- CHEVY TRAVERSE/GMC ACADIA/07-10 SATURN OUTLOOK/07-09 BUICK ENCLAVE (EXCL. 2010-11 BUICK ENCLAVE) Page 5 of 5 Passenger Side Installation Pic

Comments to this Manuals

No comments

Aries-automotive S224031 User Manual

Browse online or download User Manual for For the car Aries-automotive S224031. Aries Automotive S224031 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Aries-automotive S224031