Aries-automotive 3060-2 User Manual download pdf

Page 1 of 2 2/15/07 (AM)

PARTS LIST:

1 Grille Guard 2

10-1.50mm x 25mm Button Head Bolts

1 Driver Side Mounting Bracket (D) 4 10-1.50mm x 25mm Hex Head Bolts

1 Passenger Side Mounting Bracket (G) 4 10-1.50mm x 30mm Hex Head Bolts

1 Driver Side Top Bracket (E) 12

10mm Flat Washers

1 Passenger Side Top Bracket (F) 2 10mm Nylock Nuts

1 Driver Side Top Support Bracket (A) 4 10mm Lock Washers

1 Passenger Side Top Support Bracket (C) 6 12-1.75mm x 30mm Hex Head Bolts

2 Double Nut Plate (B) 6 12mm Nylock Nuts

12 12mm Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. Insert (1) Double Nut Plate into front of driver side frame so threaded nuts line up with existing

holes on the frame.

3. Partially thread (1) 10-1.50mm x 30mm Hex Head Bolt, (1) 10mm Lock Washer, and (1) 10mm

Flat Washer through existing rear hole and into previously inserted Double Nut Plate. Insert

driver side Mounting Bracket trough previously inserted bolt using the open slotted hole on the

Mounting Bracket (Figure 1).

4. Attach front side of the driver side Mounting Bracket using the same hardware used in step 3

(Figure 1). Do not tighten at this time.

5. Repeat steps 2-4 for passenger side Mounting Bracket.

6. From underside of vehicle, remove the two existing nuts from the inner side of front bumper

mounts. Position driver side Top Support Bracket trough existing front bumper mount bolts.

Secure Support Bracket using the factory nuts (Figure 2). Tighten these bolts at this time.

7. Trough upper driver side corner on the bumper air inlet, insert driver side Top Bracket and

attach to previously installed Support Bracket using the included (2) 10-1.50mm x 25mm Hex

Head Bolts and (2) 10mm Flat Washers (Figure 3). Do not tighten at this time.

8. Repeat step 6 & 7 for passenger side Top Support Bracket and Top Bracket.

9. With help place Grille Guard up to front of vehicle on the inner side of Mounting Brackets.

Attach Grille Guard to Mounting Brackets using the included (6) 12-1.75mm x 30mm Hex Head

Bolts, (6) 12mm Nylock Nuts, and (12) 12mm Flat Washers (Figure 4). Do not tighten at this

time.

10. Attach Top Support Brackets to Grille Guard using the included (2) 10-1.50mm x 25mm Button

Head Bolts, (2) 10mm Nylock Nuts, and (4) 10mm Flat Washers (Figure 3). Do not tighten at

this time.

11. Level and adjust Grille Guard as desired, then tighten all hardware at this time.

12. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

INSTALLATION INSTRUCTIONS

GRILLE GUARD

07 FORD EXPEDITION

PART#3060-2/3060

(A)

(B)

(C)

(D)

(E) (F)

(G)

1 2

INSTALLATION INSTRUCTIONS 1

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

Page 1 of 2 2/15/07 (AM) PARTS LIST: 1 Grille Guard 2 10-1.50mm x 25mm Button H

Page 2

Page 2 of 2 2/15/07 (AM) 10mm x 25mm Hex Head Bolts, 10mm Flat Washers (Driver Side Ins

Related models: 3060

Comments to this Manuals

No comments

Aries-automotive 3060-2 User Manual

Browse online or download User Manual for For the car Aries-automotive 3060-2. Aries Automotive 3060-2 User Manual [ru]

Summary of Contents

Related models: 3060

Comments to this Manuals

Related products and manuals for For the car Aries-automotive 3060-2