Aries-automotive 206004-2 User Manual download pdf

(888) 800-ARIES

INSTRUCTIONS

MOUNT KIT 206004 (2003-04 HONDA ELEMENT)

QTY. CONTENTS

SIDE TUBES

2 FRONT FRAME BRACKETS

2 FRONT BRACKETS

2 REAR FRAME BRACKETS

2 CENTER FRAME BRACKETS

20 FLANGE BOLTS

4 PLATE BOLTS

8 FLANGE NUTS

4 LG. FLANGE NUTS

4 PLASTIC WASHERS

2 METAL WASHERS

12 ¼” BOLTS

12 ¼” LOCK WASHERS

12 ¼” WASHERS

12 ¼” HEX NUTS

STEP 1 REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.

STEP 2 ATTACH ALL FRAME BRACKETS TO OVAL TUBES USING ¼” HARDWARE AS SHOWN IN FIGURE 1.

STEP 3 POSITION FRONT BRACKET AT THE LEFT FRONT SIDE STEP HOLDER AND INSTALL FOUR FLANGE BOLTS WITH FOUR SMALL FLANGE

NUTS. DO NOT TIGHTEN YET. SEE FIGURE 2.

STEP 4 INSTALL ONE PLASTIC WASHER HALFWAY INTO EACH PLATE BOLT FIGURE 3.

STEP 5 INSERT THE HEAD OF THE PLATE BOLT INTO THE FRAME HOLE AS SHOWN IN FIGURE 4. HOLD THE BOLT BY THE THREADS AND

ROTATE IT INTO POSITION, THEN PUSH THE PLASTIC WASHER AGAINST THE FRAME. INSTALL THE OTHER PLATE BOLT THE SAMEWAY.

STEP 6 REMOVE THE FIVE CLIPS FORM UNDERNEATH THE VEHCILE. SEE FIGURE 5.

STEP 7 POSITION THE LEFT SIDE STEP ON THE BODY AND INSTALL SIX FLANGE BOLTS (INSTALL ONE METAL WASHER TO THE UPPER

CENTER FLANGE BOLTS) AND INSTAL THE TWO LARGE FLANGE NUTS. SEE FIGURE 5.

STEP 8 TORQUE THE SMALL FLANGE NUTS INSTALLED IN STEP 1 TO 20.6 Nm (15.2 lb-ft)

STEP 9 REPEAT STEPS 1 THROUGH 7 TO INSTALL THE RIGHT SIDE STEP.

1 2

(888) 800-ARIES INSTRUCTIONS MOUNT KIT 206004 (2003-04 HONDA ELEMENT) QTY. CONTENTS 2 SIDE TUBES 2 FRONT FRAME BRACKETS 2

Page 2

FIGURE THREE FIGURE 4 FINISH PROTECTION- ARIES PRODUCTS HAVE A HIGH FINISH THAT MUST BE MAINTAINED SUCH AS ANY OTHER HIGH FINISH PRODU

Related models: 206004

No comments